Mobile ODIN is the on-device firmware flasher of choice. Just throw those firmware files on your (internal or external) SD card, start Mobile ODIN and flash away.
! Your device must be rooted to be able to use Mobile ODIN. Check the list below to see if your device is supported !
If you use the EverRoot option (Market/Pro version only), Mobile ODIN will root the firmware while you flash it. Checking out that new leaked firmware? No reason to lose root!
All partitions are supported, as are loose files, .tar files and .tar.md5 files. Mobile ODIN will even check the MD5 signatures before flashing. While in theory Mobile ODIN can repartition and flash EFS and bootloaders, it will cowardly refuse to do so, for your own safety.
Flashing with Mobile ODIN is easy. You start off by starting the app. The app will check your system has everything the app needs to continue (like root). The Pro version will download additional packages if needed automatically - so it is advised to have Wi-Fi available - for the Lite version you need to install the right package manually (see the FlashKernels posts a few posts down).
Now you should see the main Mobile ODIN screen. It will list a set of partitions. Clicking a partition will allow you to select a file from your SD card to flash to that partition. Do not worry about selecting the wrong file - Mobile ODIN will not let you. Separate files (named after the partition) as well as .tar and .tar.md5 files are supported. Specific .exe files (Odin3Excutor one-click packages) are also supported.
From the desktop ODIN you may be used to "PDA", "PHONE", and "CSC" buttons. All three of these buttons have been replaced by the "Open file ..." button. This button will open the file you select from the SD card, and find all the partitions it can flash inside that file. So if you select a .tar file containing kernel and modem, the Kernel and Modem partitions will be set up to use that .tar file for flashing. To get the same result as desktop ODIN, use Open file... on .tar files for PDA, PHONE and CSC, in that order.
Now that we have selected what we want to flash, if you have the Pro version you can proceed to the EverRoot section. The EverRoot options allows you to root your firmware while it is being flashed. Never again will you be without root! Select here which apps you want to inject in the firmware that is being flashed.
Now that we are all done selecting partitions and configuring EverRoot, we continue to "Flash firmware". Mobile ODIN will gather all the information it needs and perform the flash. Before starting, however, it will check that your battery level is over 50%, and if applicable offer to verify MD5 checksums on the files you have selected to flash. If all is well, it will reboot into recovery mode, and flash the firmware you have selected.
You can also enable the wipe option. This will wipe both data and cache partition. BEWARE: If you have a device that shares the same space between data and internal sdcard partitions, enabling the wipe option will also wipe the internal sdcard !
Flashing with Mobile ODIN does NOT increase your custom kernel flash counter or make the yellow warning triangle appear.
! USE AT YOUR OWN RISK !
Download
Mobile ODIN Pro - Android Market Website (Desktop)
Mobile ODIN Pro - Android Market App (Mobile)
Seen below is the link of Lite version of Mobile ODIN .version. Please note that you also need to download and install a "FlashKernel" manually if you are using the Lite version.
MobileODINLite-v2.25.apk
Changelogs
! Your device must be rooted to be able to use Mobile ODIN. Check the list below to see if your device is supported !
If you use the EverRoot option (Market/Pro version only), Mobile ODIN will root the firmware while you flash it. Checking out that new leaked firmware? No reason to lose root!
All partitions are supported, as are loose files, .tar files and .tar.md5 files. Mobile ODIN will even check the MD5 signatures before flashing. While in theory Mobile ODIN can repartition and flash EFS and bootloaders, it will cowardly refuse to do so, for your own safety.
Flashing with Mobile ODIN is easy. You start off by starting the app. The app will check your system has everything the app needs to continue (like root). The Pro version will download additional packages if needed automatically - so it is advised to have Wi-Fi available - for the Lite version you need to install the right package manually (see the FlashKernels posts a few posts down).
Now you should see the main Mobile ODIN screen. It will list a set of partitions. Clicking a partition will allow you to select a file from your SD card to flash to that partition. Do not worry about selecting the wrong file - Mobile ODIN will not let you. Separate files (named after the partition) as well as .tar and .tar.md5 files are supported. Specific .exe files (Odin3Excutor one-click packages) are also supported.
From the desktop ODIN you may be used to "PDA", "PHONE", and "CSC" buttons. All three of these buttons have been replaced by the "Open file ..." button. This button will open the file you select from the SD card, and find all the partitions it can flash inside that file. So if you select a .tar file containing kernel and modem, the Kernel and Modem partitions will be set up to use that .tar file for flashing. To get the same result as desktop ODIN, use Open file... on .tar files for PDA, PHONE and CSC, in that order.
Now that we have selected what we want to flash, if you have the Pro version you can proceed to the EverRoot section. The EverRoot options allows you to root your firmware while it is being flashed. Never again will you be without root! Select here which apps you want to inject in the firmware that is being flashed.
Now that we are all done selecting partitions and configuring EverRoot, we continue to "Flash firmware". Mobile ODIN will gather all the information it needs and perform the flash. Before starting, however, it will check that your battery level is over 50%, and if applicable offer to verify MD5 checksums on the files you have selected to flash. If all is well, it will reboot into recovery mode, and flash the firmware you have selected.
You can also enable the wipe option. This will wipe both data and cache partition. BEWARE: If you have a device that shares the same space between data and internal sdcard partitions, enabling the wipe option will also wipe the internal sdcard !
Flashing with Mobile ODIN does NOT increase your custom kernel flash counter or make the yellow warning triangle appear.
! USE AT YOUR OWN RISK !
Download
Mobile ODIN Pro - Android Market Website (Desktop)
Mobile ODIN Pro - Android Market App (Mobile)
Seen below is the link of Lite version of Mobile ODIN .version. Please note that you also need to download and install a "FlashKernel" manually if you are using the Lite version.
MobileODINLite-v2.25.apk Changelogs
0 comments:
Post a Comment